SE-1201 Electrocardiograph User Manual Basic Operation Guidance
- 33 -
4.1.3 Selecting an Item
Take the Work Mode Setup window for example:
1. In the Work Mode Setup window, press Tab or Shift + Tab to move the cursor among
different check boxes. Press Space to select a check box, and a check mark √ appears in the
box.
2. In the Work Mode Setup window, press Tab or Shift + Tab to move the cursor to a list box
or dropdown. Press the Up or Down arrow to highlight an option.
3. In the Work Mode Setup window, press Tab or Shift + Tab to move the cursor to a textbox.
Enter data in the selected textbox.
4. Press Enter to confirm, or press Tab or Shift + Tab to move the cursor to the OK button, and
then press Enter
to confirm.
5. Press Esc to cancel the operation, or press Tab or Shift + Tab to move the cursor to the
Cancel button, and then press Enter
to cancel the operation.
4.2 Configuring the Electrocardiograph
For details on configuring the system settings and the order settings, please refer to Chapter 10
“System Setup” and Section 8.5 “Setting Orders”.
Check Box
List Box
Textbox
Dropdown
To Next Page
Loading...
