SE-601 Series Electrocardiograph User Manual
- 15 -
and specification must be used.
4. Only when the device is off can the battery be installed or removed.
Note: If the battery has not been used for two months or more, you should recharge
it before using it again.
2) Fuse
There is a fuse installed on the bottom of the main unit. The specification is T1AL250VP
Ø5×20.
WARNING : Ruptured fuse must only be replaced with that of the same type
and rating as the original.
2.6 Function Features
♦ Low weight and compact size
♦ Multi-language support
♦ ECG signals of 12 leads are gathered and amplified simultaneously, 6-channel waves
are displayed and recorded simultaneously
♦ High resolution thermal recorder, recording frequency response ≤150Hz
♦ Flexible printing formats
♦ Full alphanumeric capability QWERTY keyboard
♦ The auto, manual, rhythm, and R-R modes are optional
♦ Convenient operation of system setup and file management
♦ Measurement function and interpretation function are optional
♦ Hint information of lead off, lack of paper and low battery capacity etc.
♦ Built-in rechargeable lithium battery with large capacity
♦ Automatic baseline adjustment for optimal printing
♦ Supporting real-time sampling, pre-sampling, period sampling and arrhythmia
triggering sampling
♦ LCD backlight and the device can be turned off automatically according to the set time
♦ The patient information to be printed is optional
To Next Page
Loading...
