SE-601 Series Electrocardiograph User Manual
- 56 -
Chapter 8 Managing Files
If you want to save the ECG data in the electrocardiograph, you should set the Save Option item
to On. The default value is On. Then the ECG data in the AUTO or RHYT mode will be saved
on the File Manage interface automatically.
To Set Save Option to On
1. When the main interface1 is displayed, press the function key F5 below to open the
main interface2. Press the function key F1 below Setup to open the System Setup interface.
2. Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor. When the cursor is on More,
press Enter.
3. Press Tab or Shift + Tab to move the cursor to the Save Option item.
4. For SE-601B/C, press F1 or F2 to select On. For SE-601A, press F3 or F4 to select On.
5. Press Enter to confirm.
6. On the System Setup interface, press Esc or the function key F5 below to return to
the main interface1.
To Switch to the File Manage Interface 1/2/3
When the main interface1 is displayed, press the function key F5 below to open the
main interface2. Press the function key F2 below File to open the File Manage interface1.
1. Press the function key F5 below to display the File Manage interface2. Then press
the function key F5 below to return to the File Manage interface1.
2. Or press F1, F2, Shift + F1 or Shift + F2 to highlight a file on the File Manage interface1,
and then press the function key F4 below Select to select the file and display the File Manage
interface3. For SE-601B/C, press Esc to return to the File Manage interface1. For SE-601A,
press Esc or the function key F5 below to return to the File Manage interface1.
Note: Pressing Shift+F1 or Shift+F2 can move the cursor quickly.
3. When the File Manage interface1 is displayed, press Esc to return to the main interface1.
To Next Page
Loading...
