SE-601 Series Electrocardiograph User Manual
- 37 -
Chapter 5 Switching On the
Electrocardiograph
♦ When the mains supply is used, connect the power cord, and the mains supply indicator
( ) is lit. Then press on the keyboard to turn on the unit. The equipment
information such as the device name, the version number will be displayed on the LCD
screen after self-test. Then the electrocardiograph is ready for use.
♦ When a built-in rechargeable lithium battery is used, press on the keyboard directly
to turn on the unit, and then the battery indicator ( ) is lit. The equipment information
such as the device name, the version number will be displayed on the LCD screen after
self-test. Then the electrocardiograph is ready for use.
To Next Page
Loading...
