74
support@edgeovens.com Technical Support: +1 (724) 628 3050
PREFACEOPERATION
SERVICE
OVEN OPERATION
OVEN SETTINGS (CONTINUED)
CHANGING CUSTOMER PIN FROM FACTORY DEFAULT
PIN SET
✔
✖
3
2. Use the UP () or DOWN () arrows to navigate to the PIN
SET option.
3. Touch the tick (✔) icon to conrm selection.
2
4. Touch the digit you wish to adjust.
5. Adjust the value by using the UP () and DOWN () arrows on
the right hand side of the screen (numerical value 0-9).
6. Once the PIN has been entered correctly, press the tick (✔) icon
to accept or the cross (✖) icon to cancel.
7. To return to the SYSTEM MENU touch the cross (✖) icon as
required to exit each option level.
0000
✔
✖
5
4
6
1. Follow steps 1 - 5 of the “ACCESSING THE SETTINGS MENU” section, for instruction of how to access
the SETTINGS MENU options.
This action will change the factory default Customer PIN (0000). Please retain adjusted PIN
for future use. If lost or forgotten please contact the EDGE service team for assistance.
NOTICE
To Next Page
Loading...
Need help?
General
