4-73
• 4205 Towfish
• AC power cord
• Ethernet patch cable
• Towfish Accessories Kit
After unpacking the system components, safely store the shipping containers, including any packing
materials, for later use. When transporting or storing the system, pack all items in their original shipping
containers, and in the same way, they were originally shipped. Store the system in a dry environment
when not in use.
4.1.3 701 Digital Link Systems
• 701-DL Digital Link with a 2U-SKB Case
• 4205 Towfish
• AC power cord
• Ethernet patch cable
• Towfish Accessories Kit
4.1.4 4205 701-DL Rack Mount System
• 701-DL Digital Link with a 2U Computer with a Case
• 4205 Towfish
• AC power cord
• Ethernet patch cable
• Towfish Accessories Kit
After unpacking the system components, safely store the shipping containers, including any packing
materials, for later use. When transporting or storing the system, pack all items in their original shipping
containers, and in the same way, they were originally shipped. Store the system in a dry environment
when not in use.
4.2 Power Requirements
The power requirements for the 4205 Topside processors are 100–264 VAC, 50/60 Hz, and is auto-
switching.
4.2.1 Use of an Uninterrupted Power Supply
The AC power source should be continuously free of high amplitude, high-frequency transients, as this
type of interference could degrade performance or damage the equipment. An uninterrupted power
supply (UPS) with power surge protection is recommended for powering the equipment. However,
whether a UPS is used, do not use the same AC power source as one being used to power electric motors
To Next Page
Loading...
