Edwards EXS Series - Transportation

4. Transportaon
WARNING:
Do not drain the oil fr
om the pumps whether dangerous substances have been
pumped or not. Blanking plates must be ed to seal all vacuum inlet and outlet
ports (to prevent possible oil leakage). Ensure that the dry pumping system is
correctly labelled, if in doubt, contact us.
Follow the procedure laid out in Storage on page 71 and then read form HS1 and ll out
form HS2, which can be found at the back of this manual.
07/2021 - ©Edwards Limited
Page 26A41870880_A
A41870880_A - Tr
ansportaon