1.3 Safety symbols
The saf
ety symbols on the products show the areas where care and aenon is
necessary.
The safety symbols that follow are used on the product or in the product
documentaon.
Warning/Cauon
An appropria
te safety instrucon must be followed or cauon to a po-
tenal hazard exists.
Warning - Automac start up
The equipment can be remotely started.
Warning - Dangerous voltage
Idenes possible hazar
ds from dangerous voltages.
Warning - Heavy object
Idenes a possible hazar
d from a heavy object.
Warning - Hot surfaces
Idenes a potenal haz
ard from a hot surface.
Warning - Maximum angle of paired slings
The maximum angle of the pair
ed slings must not be more than 45°.
Warning - Moving parts present
Idenes parts that mo
ve. You must let the parts that turn stop before
you remove the electrical power.
Warning - Risk of explosion
There is a risk of e
xplosion when you do the task.
Warning - Read the manual
Warning - Use prot
ecve equipment
Use appropriate protecve equipment for the task.
07/2021 - ©Edwards Limited
Page 8A41870880_A
A41870880_A - Safety and compliance
To Next Page
Loading...
Need help?
General
