Edwards EXS Series User Manual

Cause Bearing defecve.
R
emedy Contact us.
8.1 Inverter warnings and alarms
The inverters used to drive the dry pump can generate warnings and alarms if problems
are encountered. The inverter warning and alarm codes are displayed by the drive
keypad. The drive keypad is visible aer you remove the bracket of the cubicle fan.
Figure 18 Remove cubicle fan
1. Screws1. Screws
Table 22 Inverter alarm codes
Condion
oL2 - Drive overload on page 66
o
v - Overvoltage on page 66
oC - Overcurrent on page 66
CE - Modbus communicaon error on page 67
GF - Ground fault on page 67
LF - Output phase loss on page 67
LF2 - Output current imbalance on page 68
PF - Input phase loss on page
68
SC - Short circuit/IGBT failure on page 68
Uv1 - DC Bus undervoltage on page 68
Uv2 - Control power undervoltage on page 69
Uv3 - So charge answerback fault on page 69
EF3 - External fault(terminal S3) on page 69
dWFL - High temperature warning on page 69
07/2021 - ©Edwards Limited
Page 65A41870880_A
A41870880_A - Fault nding

Edwards EXS Series Specifications

General

Brand	Edwards
Model	EXS Series
Category	Water Pump
Language	English