03-2009 SOI/DT-mdm FCPD-dp Quality-fz 68/91 599 70 56-70
Tests to be performed:
Tests to be performed:
Tests to be performed:
E94: Washing cycle configuration error
E94
Incongruence of configuration values at the switching on of the appliance
E94
Tests to be performed:
Tests to be performed:
Tests to be performed:
E91: Communication error between user interface and main board
E91
Incongruence of configuration values at the switching on of the appliance
E91
E92: Protocol incongruence
E92
Incongruence of configuration values at the switching on of the appliance
E92
E93: Appliance configuration error
E93
Incongruence of configuration values at the switching on of the appliance
E93
E95 E95: Communication failed between EEprom and Microprocessor E95
E97: Incongruence between version of the control selector and
configuration data
E97
Incongruence between configuration data of the programmes and those of the selector
E97
Possible configuration error
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
Possible configuration error
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
Possible configuration error
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
Possible configuration error
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
Possible configuration error
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
Replace the circuit board and restart the diagnostic cycle to check for further alarms.
To Next Page
Loading...
