Elmo MA-1 User Manual

20
◆CONNECTING TO A PROJECTOR OR MONITOR
1. Connect the product to a projector or monitor with the HDMI cable or the RGB cable.
2. Long press the Power button to turn on the product. (Power LED：Blue)
◆CONNECTING TO A PC
The product is compliant with UVC (USB video class) standard. You can transfer the
image via USB.
1. Connect the Type B terminal of the USB cable to [ ] connector in the back of
the product.
2. Connect the Type A terminal of the USB cable to the USB port of the PC.
3. Turn on the product.（Power LED：Blue）
4. Turn on the PC. Launch the app and check the image.
The app (ELMO Interactive Toolbox) can be downloaded from the following website:
⇒ https://www.elmousa.com/software/
⇒ https://www.elmoeurope.com/index.php/en/products/software-choice
For details about the app (ELMO Interactive Toolbox), refer to the Instruction Manual
in the website above.
CAUTION
・This product does not support USB power supply.
・When the battery is not fully charged or when the remaining battery level is low,
supply power by connecting the AC adapter to a wall outlet.
・The frame rate may be decreased depending on the PC used.
USB cable ⇒ Type B
Type A
USB cable⇒ USB port
HDMI cable
RGB cable

Elmo MA-1 Specifications

General

Brand	Elmo
Model	MA-1
Category	Document Camera
Language	English