ELTRA CS-800 User Manual

Service
101
Fig. 56: Infrared cell
By reinstalling the infrared cell unit in the analyzer, you must pay attention to the
color markings of the tubes and their connections.
1 black marked tube connection
2 yellow marked tube connection
3 red marked tube connection
5.1.1
113BAvailable infrared paths
Path length % C Material/ Sample weight % S
Material/Sample
weight
1 mm
3 mm
6
Metals / 500 mg
6 mm
5
Metals / 500 mg
10 mm
40
Non Metals / 200 mg
20 mm
20
Non Metals / 200 mg
30 mm
40 mm
50 mm
100 mm
4
Non Metals / 200 mg
120 mm
0,2
Metals / 500 mg
140 mm
170 mm
200 mm
0,1
Metals / 500 mg
275 mm
300 mm
0,3
Metals / 500 mg
Comments:
1,5 g Tungsten accelerator are needed when analyzing Metals.
Above sample weights for metals and alloys are just guidelines. For more accurate
information read the operation manual.
The following materials are used as non metals: cement, stone, soils, etc.

ELTRA CS-800 Specifications

General

Brand	ELTRA
Model	CS-800
Category	Measuring Instruments
Language	English