Installation
12
10. When it doesn’t match perfect, you can increase or decrease the adjustment of
800(example 820 or 780, the carousel stops as shown below, repeat the procedure until it
fits prefect.
11. When the carousel doesn’t stop at the home position screw head, please follow this point
in “Troubleshooting”.
12. TGA is now ready for starting an analysis. For information to start an analysis please read
“Step by step”.
13. If there are some problems at the installation of the TGA please read “Troubleshooting”.
Pos: 2 /0010 ELTR A/------- Seitenumbruch ----------- @ 6\mod_13687964 29449_0.docx @ 41468 @ @ 1
To Next Page
Loading...
Need help?
General
