Embedded Systems LogiMachine5 Power User Manual

117
6.7.1. Levels / Plans
By default there is Main Add new level
Please note that you can limit access to this specific level by adding PIN code.
You can also add a new level by importing it from the file (which is exported on other LM for
example). Press Import button for this purpose. Object linkage can be either cleared or
imported as-is.
Once a new level is added, you can add second level or upload floor pictures related to this
particular building. To add a new entry, click on the green icon , to delete a specific entry
press on the red icon .
When adding new plan, the following parameters should be defined:

Embedded Systems LogiMachine5 Power Specifications

General

Brand	Embedded Systems
Model	LogiMachine5 Power
Category	Controller
Language	English