148
8. Touch visualization
Touch visualization is designed for iPhone/iPod/iPad/Android touch screen devices. All objects
which are added in Logic Machine configuration by default are visible in touch visualization (if
there is no Hide in touch option enabled).
The main window is Building view where you can choose which Floor from which Building to
control. Once you choose the floor, all objects which are assigned to it, are listed and can be
controlled.
Launching visualization on touch device (iPad in this case)
Make sure your iPad is connected wirelessly to the LogicMachine (either through
Click on the Touch Visualization icon.
Save the application as permanent/shortcut in your iPad
To Next Page
Loading...