8
Device specification
Types of product
LogiMachine5 Power LM5p-PMC
Standards and norms compliance
EMC: EN61000-6-1
EN61000-6-3
PCT Certificate
Technical data:
Power supply: 1 x 12V-30V DC on terminal connectors or
12V-30V DC Passive Power-over-Ethernet
2 x 24-30V DC on terminal connectors for KNX bus
powering (automatically swaps when one of inputs fails)
Power consummation: 1.3W
Interface: KNX/EIB TP1 1
10BaseT/100BaseTX 1
RS-485 1
RS-485/RS-232 1
(switchable in software
full-duplex=RS232,
half-duplex=RS485)
USB2.0 1
Choke for up to 16 KNX
device powering and with
voltage/current monitoring max 320mA current
Connections: KNX bus: Bus Connection Terminal
0.8 mm2
Power supply Screw, 1.5 mm2
Serial Screw, 1 mm2
Operating elements LED 1 CPU load
1 - Activity
Enclosure: Material: Polyamide