Embedded Systems LogiMachine5 Power User Manual

157
 SRC policy [No filter / Accept selected individual addresses / Drop selected individual
addresses] policy to apply to the list of source individual addresses
 Ind. address list  list of individual addresses. One address/range per line. Use * (e.g.
1.1.* ) to filter all addresses in the given line.
 DST group policy [No filter / Accept selected group addresses / Drop selected group
addresses] policy to apply to the list of destination group addresses
 Group address list  list of group addresses. One address/range per line. Use * (e.g.
1/1/*) to filter all addresses in the given line.
Note! KNX IP features should be on for filter to work. Filtering lists are updated at
once, changing policies requires restart.
9.9. KNX statistics
KNX related statistics can be found in Network  KNX statistics menu.
9.10. BACnet settings
BACnet server specific configuration can be done in Network  BACnet Settings.

Embedded Systems LogiMachine5 Power Specifications

General

Brand	Embedded Systems
Model	LogiMachine5 Power
Category	Controller
Language	English