Embedded Systems LogiMachine5 Power User Manual

65
6.1.3. Adding a new script
Click on Add new script button on the bottom part of the Event-based, Resident or Scheduled
submenus
The following fields should be filled when adding a new script:
Event-based
 Script name  the name of the script
 Group address / Tag  specific group address or tag name on which the script will be
triggered
 Active specifies whether the script is active (green circle) or disabled (red circle)
 Execute on group read specifies whether the script is executed on KNX group read
telegram

Embedded Systems LogiMachine5 Power Specifications

General

Brand	Embedded Systems
Model	LogiMachine5 Power
Category	Controller
Language	English