Preface
Thank you for using TD3200 series drive made by Emerson Network
Power Co., Ltd.
TD3200 series drives are high performance vector control drives used for
elevator door and various automatic door controls and other applications.
Before operation, be sure to read this manual carefully to ensure correct
operation and make full use of this drive's perfect functions. This manual is
delivered as an accessory of the drive. Be sure to keep it properly after
using. This manual is subject to changes without notification.
The development and design of this product is compliant with the national
standards of Elevator Manufacturing and Installation Safety Rules (GB
7588-1995). Besides, when it is used with other controller to form a system,
this system can also meet the requirements of the standards if used
properly. Users must install and use the product according to the national
standards as well as the directions of this manual, and Emerson Network
Power bears no responsibility for any human injury or material loss due to
incorrect use of this product.
Contents
The components, installation and wiring, daily application, fault-handling
and maintenance of TD3200 series drive are described in detail in this
manual.
Readers
Drive installation personnel, engineering maintenance personnel and
designers.
Typographic Conventions:
Danger
!
Operations that are not performed in compliant with the
requirements may cause death or severe hurt.
To Next Page
Loading...
Need help?
General