Emerson Aventics G3 Series User Manual

G3 Series EtherCAT
TM
Technical Manual
14-154
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Select the box for IP Address
Enter an IP address of the G3 EtherCAT
TM
node
Enter the Subnet mask
Enter the default Gateway (The gateway must be the same as the Beckhoff controller’s
virtual port address)
Enter the DNS name “netx”
“Activate” the configuration

Emerson Aventics G3 Series Specifications

General

Brand	Emerson
Model	Aventics G3 Series
Category	Industrial Equipment
Language	English