Emerson Aventics G3 Series - Analog Module Graphic Display Functions

G3 Series EtherCAT
TM
Technical Manual
10-99
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Analog Graphic Display
The G3 Analog I/O modules have an integrated graphic display that may be used to
configure the parameters of the modules as well as show diagnostic information. Please see
the following pages for detailed information regarding these displays.
I/O MAPPING
INPUT BYTE XX
I/O MAPPING
OUTPUT BYTE XX
MODULE NUMBER
XX
ALARM SETTINGS
DESCRIPTION
2AI/2AO
PART NUMBER
240-2XX
FIRMWARE
V2.XXX
SET BRIGHTNESS
MEDIUM
SET SELF TEST
FACTORY
DEFAULTS
HELP