Emerson Aventics G3 Series - IP Address Configuration; Subnet Mask Configuration

G3 Series EtherCAT
TM
Technical Manual
5-33
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
IP Address
Subnet Mask
Subnet Mask
1. The Subnet Mask can only be modified from the module
display with EtherCat
TM
disabled (TCP IP only).
• Factory default address is 192.168.003.120
NOTE!
IP Address
1. The IP address can only be modified from the module display
with EtherCat
TM
disabled (TCP IP only).
• The ETHERCAT
TM
Factory default Subnet Mask is 255.255.255.0.
NOTE!
IP ADDRESS
192.168.100.120
SUBNET MASK
255.255.255.0