Emerson Aventics G3 Series - Factory Default Settings Summary

G3 Series EtherCAT
TM
Technical Manual
16-181
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Factory Default Settings
FACTORY DEFAULT SETTINGS
Description
Default
IP Address 193.168.003.120
Subnet Mask 255.255.255.0
Gateway IP 0.0.0.0
I/O Status
Enabled
Diag. Word Enabled
Fault Action Off
Brightness Medium
Parameters Unlocked
I/O configuration Unlocked