Default settings for mA Output Process VariableTable 10-1:
Device Channel mA output
Default process variable assign-
ment
SGM mA Channel A Primary mA output Specific gravity, relative density,
or molecular weight
Channel B Secondary mA output Temperature
SGM DO Channel A Primary mA output Specific gravity, relative density,
or molecular weight
SGM TPS Channel A Primary mA output Temperature
SGM Fixed Channel A Primary mA output Temperature
(1)
(1) Not configurable.
Postrequisites
If you changed the setting of mA Output Process Variable, verify the settings of Lower
Range Value (LRV) and Upper Range Value (URV).
Options for mA Output Process Variable
The transmitter provides a basic set of options for mA Output Process Variable, plus
several application-specific options. Different communications tools may use different
labels for the options.
Options for mA Output Process VariableTable 10-2:
Process variable
Label
Display ProLink III Field Communicator
Standard
Line Density DENS Line Density Density
Line Temperature TEMP Line Temperature Temperature
Line Temperature (External
or Fixed)
EXT T Line Temperature (External
or Fixed)
External Temperature
Line Pressure (External or
Fixed)
EXT P Line Pressure (External or
Fixed)
External Pressure
Volume Flow Rate (External) MAG V Volume Flow Rate (External) Volume from Mag/Vortex
Meter
Mass Flow Rate (Calculated) MAG M Mass Flow Rate (Calculated) Calculated Mass Flow from
Mag Meter Input
Mass Flow Rate (External) COR M Mass Flow Rate (External) Mass from Coriolis Meter
Volume Flow Rate (Calcula-
ted)
COR V Volume Flow Rate (Calcula-
ted)
Volume Flow at Reference
Temperature
Drive Gain DGAIN Drive Gain Drive Gain
Sensor Time Period TP B Sensor Time Period Sensor Time Period
Integrate the meter with the control system
Configuration and Use Manual 97
To Next Page
Loading...
