Biometra TRIO Installation and commissioning
21
4 Installation and commissioning
4.1 Content of delivery
Thermal Cycler
Mains connector
Manual
Short Manual
Please keep the original packaging material for return shipment in case of servicing. The
Biometra TRIO Thermal Cycler shipping box provides a specially developed system with
form blocks for a safe transport of this electronic device.
4.2 Unpack and Check
Unpack and carefully examine the instrument. Report any damage to Biometra.
WARNING
Do not attempt to operate this device if physical damage is
present!
Please keep the original packing material for return shipment in case of service issues.
4.3 Operation Voltage
WARNING
Danger of electric shock!
Prior to connecting the Biometra TRIO Thermal Cycler to the
mains, make sure that the setting of the
voltage selector is in accordance with your
voltage.
The Biometra TRIO Thermal Cycler can operate at 100, 115 or 230 Volt. The operation
Voltage is shown on the Voltage selector, which is located at the instrument bottom.
To change operation voltage, switch off the instrument and disconnect the mains plug.
Use a coin or another round shape item to turn the adjustment slot of the Voltage selec-
tor to the new Voltage.
To Next Page
Loading...
