Endress+Hauser Analytik Jena Biometra TRIO - Incubation Mode

Biometra TRIO Operating
41
6.7 Incubation Mode
Note: Incubations can only be started or stopped by users with the right Start/stop pro-
grams activated (see section "Edit user" p. 88).
Enable a user to start or stop programs
The incubation mode allows to incubate samples at a constant temperature for a de-
fined time. Press the incubate button.
Incubate
In the next screen set the block temperature, hold time, heated lid on or off, heated lid
temperature and set preheating mode on or off using the virtual keypad and the corre-
sponding buttons (see Fig. 6).
Note: To set the time to endless use the following button:
Endless time
To select a sample block press:
Sample block 1
Sample block 2
Sample block 3
To start the incubation press the start incubation button.
Start incubation