Endress+Hauser Analytik Jena Biometra TRIO - Operating; Power On Self-Test and Login

Operating Biometra TRIO
34
6 Operating
6.1 Power On Self-Test
After the instrument is switched on the Biometra TRIO Thermal Cycler passes an initial
self- test (power on self-test). While the instrument passes the test the start screen is
shown
Fig. 7 Biometra TRIO start screen
For the power on self-test a log file is created and stored in the Thermal Cycler memory
(see section "Power-On-Logfile" p. 93).
6.2 Log in Screen
After the instrument has passed the power on self-test the log in screen is displayed.
The log in screen offers the following functions:
Command Function Section
Log in Starts the log in dialog. See section "Log in" p. 35
Block Shows the current block status. If a block is free a touch on the
button leads to a list of previously used programs for quick start
for the selected sample block (not user specific before log in).
See section Block status"" p. 37 and "Quick
start function" p. 38
EN/DE Changes the language setting for the log in screen. For user-specific language settings see
section "Create user" p. 86