Endress+Hauser Analytik Jena Biometra TRIO - Fig. 28 Biometra TRIO Program Overview Screen with Program Preview; Fig. 29 Biometra TRIO Multiblock Selection Query

To Next Page

To Previous Page

Biometra TRIO Starting, Copying and Deleting programs

Touch the corresponding buttons to select a user directory and a stored program. If the

number of user directories or programs is higher than can be maximal displayed in the

list, the buttons above and below the user and program list can be used to scroll up and

down.

For the selected program a preview opens with general information on the program and

a list of the steps (see Fig. 28). The program preview can be used to check the program

prior to start. To start the selected program press:

Start Program

Fig. 28 Biometra TRIO program overview screen with program preview

In the multiblock selection query, select the sample block to start and confirm your selec-

tion.

Fig. 29 Biometra TRIO multiblock selection query

The program will be started on the selected sample blocks.

Note For programs including a TOS step (see section "Set Temperature Optimisation

Step (TOS)" p. 52) all blocks are started simultaneously and therefore the block selection

option is not offered.

Other manuals for Endress+Hauser Analytik Jena Biometra TRIO