Endress+Hauser Proline Promag 55 - 8 Accessories; Device-Specific Accessories; Measuring Principle-Specific Accessories

Accessories Proline Promag 55 PROFIBUS DP/PA
120 Endress+Hauser
8Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor. The Endress+Hauser service organization can provide detailed
information on the order codes of your choice.
8.1 Device-specific accessories
8.2 Measuring principle-specific accessories
Accessory Description Order code
Promag
55 transmitter
Transmitter for replacement or for stock. Use the order
code to define the following specifications:
–Approvals
– Degree of protection / version
– Cable type for the remote version
– Cable entries
– Display / power supply / operation
–Software
– Outputs / inputs
55XXX – XXXXX * * * * * * * *
Software packages for
Promag 55
PROFIBUS PA
Software add-ons on F-CHIP - can be ordered
individually:
– Electrode Cleaning Circuitry (ECC)
– Advanced diagnostics
– Solids flow
DK5SO-X
Accessory Description Order code
Mounting kit for
Promag 55 transmitter
Mounting kit for wall-mounted housing (remote version).
Suitable for:
• Wall mounting
• Pipe mounting
• Panel mounting
Mounting set for aluminum housings. Suitable for:
• Pipe mounting
DK5WM – *
Wall-mounting kit for
Promag H
Wall-mounting kit for the Promag H sensor DK5HM – * *
Cable for remote version Coil and signal cables, various lengths. Reinforced cable
on request.
DK5CA - * *
Ground cable for Promag S A set consists of two ground cables. DK5GC – * * *
Ground disk /liner
protection plate for
Promag S
Metal disk for potential equalization and/or for protecting
liner of measuring tube lining.
DK5GD – * * * * *
Mounting kit for
Promag H
Mounting kit for Promag H, comprising:
• 2 process connections
• Threaded fasteners
•Seals
DKH * *
 * * * *
Set of seals for Promag H For regular replacement of the seals of the Promag H
sensor.
DK5HS – * * *
Welding jig for Promag H Welding nozzle as process connection:
welding jig for installation in pipe.
DK5HW – * * *
Adapter connection for
Promag H
Adapter connections for installing Promag 55H instead of
Promag 30/33A or Promag 30/33H / DN 25.
DK5HA – * * * * * *
Ground rings for Promag H If the process connections are made of PVC or PVDF,
ground rings are necessary to ensure that potential is
matched. Set of ground rings, comprising: 2 ground rings
DK5HR – * * * *