Endress+Hauser Proline Promag 55 - Operating Options; Operating Program Fieldcare; Operating Program SIMATIC PDM (Siemens)

Proline Promag 55 PROFIBUS DP/PA Operation
Endress+Hauser 63
5.5 Operating options
5.5.1 Operating program "FieldCare"
Fieldcare is Endress+Hauser’s FDT-based plant Asset Management Tool and allows the
configuration and diagnosis of intelligent field devices. By using status information, you also have a
simple but effective tool for monitoring devices. The Proline flowmeters are accessed via a service
interface or via the service interface FXA193.
5.5.2 Operating program "SIMATIC PDM" (Siemens)
SIMATIC PDM is a standardized, manufacturer-independent tool for the operation, configuration,
maintenance and diagnosis of intelligent field devices.