Endress+Hauser Proline Promag 55 - 10.1.13 Ordering Information; 10.1.14 Accessories; 10.1.15 Documentation

Technical data Proline Promag 55 PROFIBUS DP/PA
156 Endress+Hauser
• CAN/CSA-C22.2 (No. 1010.1-92)
Safety requirements for Electrical Equipment for Measurement and Control and Laboratory Use.
Pollution degree 2, Installation Category I.
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics.
10.1.13 Ordering information
The Endress+Hauser service organization can provide detailed ordering information and
information on specific order codes on request.
10.1.14 Accessories
Various accessories are available for the transmitter and the sensor. These can be ordered separately
from Endress+Hauser  ä 120.
!
Note!
The Endress+Hauser service organization can provide detailed information on the order codes of
your choice.
10.1.15 Documentation
• Flow Measurement (FA005D/06)
• Promag 55S Technical Information (TI00071D/06)
• Promag 55H Technical Information (TI00096D/06)
• Promag 55 Description of Device Functions (BA00125D/06)
• Supplementary documentation on Ex-ratings: ATEX, FM, CSA