Proline Promag 55 PROFIBUS DP/PA Identification
Endress+Hauser 7
2 Identification
2.1 Device designation
The flow measuring system consists of the following components:
• Promag 55 transmitter
• Promag S and Promag H sensor
Two versions are available:
• Compact version: Transmitter and sensor form a single mechanical unit.
• Remote version: Transmitter and sensor are installed separately.
2.1.1 Nameplate of the transmitter
A0006108
Fig. 1: Nameplate specifications for the "Promag 55" transmitter (example)
1 Order code/serial number: See the specifications on the order confirmation for the meanings of the individual
letters and digits
2 Power supply/frequency/Power consumption
3 Additional functions and software
4 Available inputs and outputs
5 Reserved for additional information on special products
6 Observe device documentation
7 Reserved for certificates, approvals and for additional information on device version
8 Degree of protection
9 Permitted ambient temperature range
PROMAG 55
–20°C (–4°F) <Tamb<+50°C (+122°F)
IP67 / NEMA/Type 4X
Order Code:
Ser.No.:
TAG No.:
55S1H-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
20-260VAC / 20-64VDC
50-60Hz
PROFIBUS DP (Profile 3.0)
45VA/19W
i
EPD/MSU
B
P
U S
R O IF
R
1
2
3
4
5
6
7
8
9
N12895
To Next Page
Loading...
