Endress+Hauser Proline Promag 55 - Brief operating instructions for the function matrix

Operation Proline Promag 55 PROFIBUS DP/PA
60 Endress+Hauser
5.3 Brief operating instructions for the function matrix
!
Note!
• See the general notes  ä 61
• Function descriptions  See the "Description of Device Functions" manual (BA00125D)
1. HOME position  F  Entry into the function matrix
2. O / S Select a block (e.g. USER INTERFACE)  F
3. O / S Select a group (e.g. CONTROL)  F
4. O / S Select a function group (e.g. BASIC CONFIGURATION)  F
5. Select a function (e.g. LANGUAGE) and
change parameter/enter numerical values:
O / S  Select or enter release code, parameters, numerical values
F  Save entries
6. Exit the function matrix:
– Press and hold down X for longer than 3 seconds  HOME position
– Repeatedly press X  Return step by step to HOME position
A0001210
Fig. 44: Selecting functions and configuring parameters (function matrix)
-
+
E
Esc
>3s
E
E
E
E
E E E E E E E
–
+
–
+
–
E
+
Esc
–
+
–
+
–
+
–
+
Esc
–
m
op
q
r
n
+