Endress+Hauser Proline Promag 55 - Nameplate of the Sensor

Identification Proline Promag 55 PROFIBUS DP/PA
8 Endress+Hauser
2.1.2 Nameplate of the sensor
A0006109
Fig. 2: Nameplate specifications for the "Promag" sensor (example)
1 Order code/serial number: See the specifications on the order confirmation for the meanings of the individual
letters and digits
2 Calibration factor with zero point
3 Nominal diameter/nominal pressure
4 Fluid temperature range
5 Materials: lining/measuring electrode
6 Reserved for additional information on special products
7 Permitted ambient temperature range
8 Observe device documentation
9 Reserved for additional information on device version (approvals, certificates)
10 Calibration tolerance
11 Additional information
– EPD: with empty pipe detection electrode
– R/B: with reference electrode
12 Degree of protection
13 Flow direction
–20°C (–4°F)<Tamb<+50°C (+122°F) NEMA/Type4X
55S1H-XXXXXXXXXXXX
1.0000/0000
–20 ...+150°C/–4 ...+300°F°C °F
PFA
12345678901
ABCDEFGHJKLMNPQRST
DN100 DIN EN PN40/
EPD/MSÜ, R/B
TM:
Order Code:
K-factor:
Ser.No.:
TAG No.:
PROMAG S
1
2
3
7
12
1.4435/316L
0.2% CAL
4
5
6
10
11
8
9
i
13
N12895
Materials:
Electrodes: