Endress+Hauser Proline Promag 55 - Nameplate for Connections

Proline Promag 55 PROFIBUS DP/PA Identification
Endress+Hauser 9
2.1.3 Nameplate for connections
A0006112
Fig. 3: Nameplate specifications for Proline transmitter connections (example)
1 Serial number
2 Possible configuration of current output
3 Possible configuration of relay contacts
4 Terminal assignment, cable for power supply
- Terminal No. 1: L1 for AC, L+ for DC
- Terminal No. 2: N for AC, L- for DC
5 Signals present at inputs and outputs, possible configurations and terminal assignment
6 Version of device software currently installed (incl. language group)
7 Type of communication installed
8 PROFIBUS ID No.
9 Date of installation
10 Current updates to data specified in points 6 to 9
26(+) / 27(–)
NC:
Versorgung /
Tension d'alimentation
Observer manuel d'instruction
See operating manual
Betriebsanleitung beachten
Communication:
Drivers:
Device SW:
ID XXXX (HEX)
XX.XX.XX
PROFIBUS DP
26= B (RxD/TxD-P)
27= A (RxD/TxD-N)
PROFIBUS DP Profile 3.0
()
12345678912Ser.No.:
Supply /
24(+) / 25(–)
22(+) / 23(–)
20(+) / 21(–)
N/L–
PE
A:
NO:
P:
L1/L+
12
319475-00XX
X
active
passive
normally open contact
normally closed contact
Date: DD MMM YYYY
Update 1
Ex-works / ab-Werk / réglages usine
Update 2
(WEA)
1
4
5
2
3
10
6
7
8
9