Endress+Hauser Proline Promag 55 - Icons

Proline Promag 55 PROFIBUS DP/PA Operation
Endress+Hauser 59
5.2.3 Icons
The icons which appear in the field on the left make it easier to read and recognize measured
variables, device status, and error messages.
Icon Meaning Icon Meaning
S System error P Process error
$ Fault message
(with effect on outputs)
! Notice message
(without effect on outputs)
| 1 to n Current output 1 to n P 1 to n Pulse output 1 to n
F 1 to n Frequency output 1 to n S 1 to n Status output/relay output 1 to n
A0001187
Status input
A0001182
Measuring mode:
SYMMETRY (bidirectional)
A0001183
Measuring mode:
STANDARD
A0001181
Measuring mode:
PULSATING FLOW
A0001188
Volume flow
A0001195
Mass Flow
A0001206
Acyclic communication
via PROFIBUS active
(e.g. via FieldCare)


(scrolling
display)
Cyclic communication via
PROFIBUS active, for example via
PLC (Class 1 master)
A0002322
Display value (DISPLAY_VALUE
module)
with status GOOD = good
A0002321
Display value (DISPLAY_VALUE
module)
with status UNC = uncertain
A0002320
Display value (DISPLAY_VALUE
module)
with status BAD = bad
A0004616
Output value OUT,
Analog Input 1 to 2
(AI module) with
status GOOD
A0002325
Output value OUT,
Totalizer 1 to 3
(TOTAL module)
with status GOOD
A0004617
Output value OUT,
Analog Input 1 to 2
(AI module) with
status UNC =
uncertain
A0002327
Output value OUT,
Totalizer 1 to 3
(TOTAL module)
with status UNC =
uncertain
A0004618
Output value OUT,
Analog Input 1 to 2
(AI module) with
status BAD
A0002329
Output value OUT,
Totalizer 1 to 3
(TOTAL module)
with status BAD