Endress+Hauser Proline Promag 55 - Page 24

Installation Proline Promag 55 PROFIBUS DP/PA
24 Endress+Hauser
500 PN 25 20 × M 33 – 360 533 – 317
600 PN 10 20 × M 27 93 219 345 – 206
600 * PN 16 20 × M 33 202 443 658 – 415
600 PN 25 20 × M 36 – 516 731 – 431
* Designed acc. to EN 1092-1 (not to DIN 2501)
Promag S
Nominal
diameter
ANSI
Pressure
rating
Threaded
fasteners
Max. torque [lbf ft]
[inch] [lbs] Natural
rubber
Polyurethane PTFE PFA Hard rubber
½" Class 150 4 × ½" – – 4.4 – –
½" Class 300 4 × ½" – – 4.4 – –
1" Class 150 4 × ½" – 5.2 8.1 7.4 –
1" Class 300 4 × 5/8" – 5.9 10 8.9 –
1½" Class 150 4 × ½" – 7.4 18 15 –
1½" Class 300 4 × ¾" – 11 25 23 –
2" Class 150 4 × 5/8" – 16 35 32 26
2" Class 300 8 × 5/8" – 8.1 17 16 13
3" Class 150 4 × 5/8" 15 32 58 49 44
3" Class 300 8 × ¾" – 19 35 31 28
4" Class 150 8 × 5/8" 11 23 41 37 31
4" Class 300 8 × ¾" – 30 49 44 43
6" Class 150 8 × ¾" 24 44 78 63 58
6" Class 300 12 × ¾" – 38 54 49 52
8" Class 150 8 × ¾" 38 59 105 80 79
10" Class 150 12 × 7/8" 42 55 100 – 75
12" Class 150 12 × 7/8" 58 76 131 – 98
14" Class 150 12 × 1" 77 117 192 – 100
16" Class 150 16 × 1" 75 111 181 – 94
18" Class 150 16 × 1 1/8" 108 173 274 – 150
20" Class 150 20 × 1 1/8" 105 160 252 – 135
24" Class 150 20 × 1¼" 161 226 352 – 198
Promag S
Nominal
diameter
EN (DIN)
Pressure
rating
Threaded
fasteners
Max. tightening torque [Nm]
[mm] [bar] Natural
rubber
Polyurethane PTFE PFA Hard rubber