Endress+Hauser Proline Promass F 300 - Page 245

Proline Promass F 300 EtherNet/IP Technical data
245
High-temperature version
Flanges according to EN 1092-1 (DIN2501) / according to ASME B 16.5 /
as per JIS B2220:
– Stainless steel, 1.4404 (F316/F316L)
– Alloy C22, 2.4602 (UNS N06022)
List of all available process connections →  245
Seals
Welded process connections without internal seals
Accessories
Protective cover
Stainless steel, 1.4404 (316L)
External WLAN antenna
• Antenna: ASA plastic (acrylic ester-styrene-acrylonitrile) and nickel-plated brass
• Adapter: Stainless steel and nickel-plated brass
• Cable: Polyethylene
• Plug: Nickel-plated brass
• Angle bracket: Stainless steel
Process connections • Fixed flange connections:
– EN 1092-1 (DIN 2501) flange
– EN 1092-1 (DIN 2512N) flange
– Namur lengths in accordance with NE 132
– ASME B16.5 flange
– JIS B2220 flange
– DIN 11864-2 Form A flange, DIN 11866 series A, flange with notch
• Clamp connections
Tri-Clamp (OD tubes), DIN 11866 series C
• Thread:
– DIN 11851 thread, DIN 11866 series A
– SMS 1145 thread
– ISO 2853 thread, ISO 2037
– DIN 11864-1 Form A thread, DIN 11866 series A
• VCO connections
– 8-VCO-4
– 12-VCO-4
For information on the different materials used in the process connections →  244
Surface roughness All data relate to parts in contact with fluid. The following surface roughness quality can
be ordered.
• Not polished
• Ra
max
= 0.8 µm (32 µin)
• Ra
max
= 0.4 µm (16 µin)