Endress+Hauser Proline Prosonic Flow 93 User Manual

Brief operating instructions PROline Prosonic Flow 93 PROFIBUS-DP/-PA
2 Endress+Hauser
Brief operating instructions
These brief operating instructions explain how to configure your measuring device
quickly and easily:
Safety instructions Page 7
Please read the safety instructions through carefully.
▼
Connecting the transmitter Page 48
Install the sensors using the transmitter software. Therefore connect the
transmitter first to the power supply.
▼
Switching on the measuring device Page 81
Description of the startup sequence visible on the local display after switching
on the transmitter.
▼
Display and operating elements Page 56
A short overview of the different display and operating elements to allow you to
start quickly.
▼
Installing the sensors Page 17 ff.
Installing the flowrate measuring sensors Prosonic Flow P (Clamp On)
Installing the flowrate measuring sensors Prosonic Flow W (Clamp On)
Installing the flowrate measuring sensors Prosonic Flow U (Clamp On)
Installing the flowrate measuring sensors Prosonic Flow W (Insertion)
Installing the sound velocity measuring sensors DDU 18
Installing the wall thickness measuring sensor DDU 19
1
2
+
22
–
23
+
20
–
21
+
24
–
25
+
26
–
27
TOT1
OK
+24.502
+1863.97
l
m
3
s
–50
+50
%
v
v
Esc
E
+
-

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English