Endress+Hauser Proline Prosonic Flow 93 User Manual

PROline Prosonic Flow 93 PROFIBUS-DP/-PA 6 Commissioning
Endress+Hauser 91
“Pipe sound velocity” measurement (only for Clamp On)
Procedure
Selection - Input - display
Local display (Quick Setup)
▼
FieldTool
▼
Commuwin II
▼
▼
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
Manufacturer-specific Transducer
Block “PROSONIC 93 PBUS”:
 SENSOR DATA (VAH5)
 SENSOR PARAM. CH1/CH2
Type of measurement MEASUREMENT (6880) MEASUREMENT MEASUREMENT
CH1 (V3H0) / CH2 (V6H0)
Sensor type SENSOR TYPE (6881) SENSOR TYPE SENSOR TYPE CH1 (V3H1)
SENSOR TYPE CH2 (V6H1)
▼
 BASIC FUNCTION
 PROCESS PARAM. CH1/CH2
 PIPE DATA
 BASIC FUNCTION
 PROCESS PARAM. CH1/CH2
 PIPE DATA
Manufacturer-specific Transducer
Block “PROSONIC 93 PBUS”:
 DE. MATRIX CH1/2 (VAH5)
 PIPE DATA CH1/CH2
Thickness reference value REFERENCE VALUE (6523) REFERENCE VALUE REFERENCE VALUE (V4H3)
Pipe sound velocity SOUND VELOCITY PIPE (6524) SOUND VELOCITY PIPE
 ADJUSTMENT/PIPE CH1/CH2
SOUND VEL. LONGI CH1/CH2
(V5H4)
▼
Display of pipe sound
velocity
SOUND VELOCITY PIPE (6524) SOUND VELOCITY PIPE SOUND VEL. LONGI CH1/CH2
(V5H6)
! Note:
• All functions are described in detail in the “Description of Device Functions” manual, which is a separate part of this
Operating Instruction!
• The procedure for running through the “Sensor Installation” Quick Setup using the local display is explained on Page 82.

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English