Specifications
Hardware Installation and Maintenance Manual A
–17
Spare Parts
Below is a list of spare parts for the H
2
O and/or CO
2
analyzer with
recommended quantities for 2 years of operation.
Due to a policy of continuous improvement, parts and part numbers may
change without notice. Not all parts listed are included on every analyzer. When
ordering, please specify the system serial number (SN) to ensure that the
correct parts are identified.
1. Contact SpectraSensors’ service department before attempting replacement. Replac-
ing this component without technical support could cause damage to other compo-
nents. For Technical Service, refer to our website for the list of local sales channels in
your area: https://www.spectrasensors.com/contact.
Table A–7 Replacement parts for SS500e/SS2000e/SS3000e
H
2
O and/or CO
2
analyzers
Part
Number
Description
2 Year
Quantity
Analyzer
2900000460
Temperature Control Board
1
-
2900000450
4-20 mA Current Loop Board
1
-
8000002693 Power Supply Assembly w/Filter, 120/240 VAC 50/60
Hz
1
-
8000002482
Power Supply Assembly w/Filter, 24 VDC
1
-
0190230011
Keypad Assembly
1
-
0190231000
Display Assembly
1
-
4500002002
Relay, DC12V SPDT 3A/120VAC
1
-
3100002151
Filter, Power Line 120/240 VAC, 5 amps
1
-
3100002152 RS-485 Converter, B&B Electronics 485LDRC9 -
3100002153 Ethernet Converter, 2-Channel, B&B Electronics
ESP902
-
2400002088
Cable Gland/Seal, 9-position, Roxtec RG00063090046
1
-
0219900005
Kit, Spares (O-rings, screws), Viton, 2-Pass Cell
1
1
0219900011 Kit, Fuse, AC/DC 1
2892102022 O-ring, Viton, AS5684-022 -
0900002146 Mirror, 0.8 m/0.1 m, Metal -
To Next Page
Loading...
Need help?
General
