SS500e/SS2000e/SS3000e Gas Analyzers
B–4 4900002230 rev. D 2-6-20
• Acetone-impenetrable gloves (North NOR CE412W Nitrile Chemsoft™
CE Cleanroom Gloves or equivalent)
• Hemostat (Fisherbrand™ 13-812-24 Rochester-Pean Serrated
Forceps)
• Bulb blower or dry compressed air/nitrogen
• Torque wr enc h
• Permanent marker
• Flashlight
Determiningthetypeofcellmirror
Measurement cells will come equipped with either a glass or stainless steel
mirror. Before determining whether to clean or replace the mirror, identify the
type of measurement cell being used in the analyzer. There are two types of
measurement cells used with the SS500e/SS2000e/SS3000e; 0.1 m and 0.8
m. Refer to Figure B–1.
The stainless steel mirrors are identified with either an “X” engraved on the
outside bottom of the mirror or a groove around the rim of the mirror. Glass
mirrors have no external markings. To determine the type of mirror being used
for the system cell:
Figure B–1 Measurement cell types
0.8 m CELL
0.1 m CELL
To Next Page
Loading...
