Section 2: Safety
18
SAFETY FEATURES AND REGULATORY
COMPLIANCE
Epilog has incorporated specific safety features into the Legend Models 6000 and 7000
Laser Systems in order to meet the requirements of 21 CFR 1040 and the International
Standard IEC 60825-1.
¾ A safety enclosure (cabinet) which fully encloses the engraving laser and its
beam path.
¾ Dual redundant interlock systems which turn off the engraving laser when
either the cabinet door or window is opened.
¾ A visible emission indication when the Laser Diode Pointer is operating.
There is an LED indicator on the machine’s front panel.
21 CFR 1040 and IEC 60825-1 require that certification, identification, and warning
labels be placed on laser products. Reproductions of labels on the Legend Models 6000
and 7000 Laser System follow, with their locations specified:
1. Certification/Identification Label. This engraved plate is located on the left-
hand side of the machine’s cabinet, below the power inlet connector. The
example shown is for the 6000/35 product having a 32 inch by 20 inch
engraving area.
Model Number: 6000 Laser System
Serial Number: 6035-0422863220EX
Date of Manufacture: October 2004
Mass:
220 kg max
Epilog Corporation
500 Corporate Circle, Suite L
Golden, CO 80401 USA
Class 3R Laser Product
This product complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001.
This product complies with IEC 60825-1: 2001.
Consultants Europe bv
PO Box 5047
1380 GA Weesp
The Netherlands
Tel.: 31-294-483355
Fax.: 31-294-414687
E-Mail: info@ce-marking.nl
Authorized Representative:
To Next Page
Loading...
Need help?
General
