Epson DS Series User Manual

138
9. Wipe off any dust or dirt on the separation roller using a genuine Epson cleaning kit or a soft, moist
cloth.
Caution: Use only a genuine Epson cleaning kit or soft, moist cloth to clean the roller; using a dry
cloth may damage the surface of the roller.
10. To replace the separation roller, insert the end of the roller into the hole on the right side and lower
the other end of the roller into place.
11. Close the separation roller cover until you hear it click into place.
Note: If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.

Epson DS Series Specifications

General

Interface	USB 2.0
Operating System Compatibility	Windows, macOS
Optical Resolution	600 dpi
Duplex Scanning	Yes
Color Depth	24-bit
Power Consumption (Standby)	Approx. 1.5 W