Epson EB-585W - Page 68

a
When projecting using USB Display, response time may be
slower.
h
Select the Easy Interactive Function setting and press the [Enter]
button.
i
Select either Two Users/Mouse or One User/Mouse as the Pen
Operation Mode setting.
j
Press the [Enter] button and press the [Menu] button to exit the
projector's configuration menu.
k
Make sure you have calibrated the first time you use your
projector.
s "Pen Calibration" p.71
l
Hold an interactive pen close to the projected screen.
The
icon is displayed on the projected screen.
a
• The icon is displayed on the right for the first time.
Next time, it is displayed on the side from which you last
opened the toolbar.
• If the
icon is not displayed, set the Pen Mode Icon
setting to On in the projector's Extended menu.
s
Extended - Display - Pen Mode Icon p.123
m
Select the icon, and then select the icon.
a
You can also change to computer interactive mode by doing the
following:
• Pressing the [Pen Mode] button on the remote control.
• Changing the Pen Mode setting on the projector's Extended
menu to PC Interactive.
s Extended - Easy Interactive Function - Pen
Mode p.126
Interactive Feature Modes
68