Epson LQ 1050 - B/W Dot-matrix Printer - Page 139

REV.-A
Step 8 : Remove two CPS (0) (3 X 10) screws securing both side frames L and R to the base frame.
~.:A
.
. -— . :
Side Frame R
CPS(0) {3 x 1 o)
Su~ Paper Release Lever
Step 9 :
Step 10:
40 . .. . . . ., . .
CPS(0) (3x 1 o)
Side Frame L
%—,
Figure 4-35. Side Frame Screws Removal
Remove the sub paper release lever from the side frame R (See Figure 4-35.).
Detach the hooks on the main unit from the base frame, and pull the main unit
up,
Hooks
f-’”.
.
Base Frame
Figure 4-36. Printer Mechanism Separation,
4-26