Epson LQ 1050 - B/W Dot-matrix Printer User Manual

REV.-A
Step 12: Hold carriage guide shaft B in place and tighten the HNO (4) nut.
Step 13: Move the carriage to the left end, and measure the gap value again to confirm that it is correct.
Step 14: Move the carriage to the right end, and measure the gap value again to confirm that it is correct.
Step 15: Remove the
printhead.
Step 16: Reinsert the ribbon mask into the ribbon mask holder.
Step 17: Connect the FPC to the
printhead, and reinstall the printhead onto the carriage.
4-39

Epson LQ 1050 - B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	LQ 1050 - B/W Dot-matrix Printer
Category	Printer
Language	English