Epson RC90 Safety And Installation

3. First Step
Safety and Installation (RC90 / EPSON RC+ 7.0) Rev.5
85
(4) Turn ON the motors.
Check that the [Control Panel] tab is open. Click the <MOTOR ON>
button.
(5) Move the manipulator with Jog motion.
1. Select [Jog & Teach] tab.
2. Select “Joint” in [Jogging]-<Mode>.
3. Move the manipulator by joint by clicking J1-J6 jog keys.
Manipulator can be moved by setting to other modes or setting the jog
distance.

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English