Basic Operations
Loading Paper
This printer provides four types of feeding methods. For cut sheets, the feeding methods vary depending on the media
thickness.
c
❏ If the cut sheets are wavy or curled, flatten them before loading them in the printer. If wavy or curled cut sheets are
loaded, this printer may not be able to detect the paper size or print correctly. We recommend that you return the
cut sheets to their original package and store them flat, and take them out of the package just before you use
them.
❏ To avoid paper jams, make sure you open the front cover and extend the output tray before printing.
In addition, available paper sizes vary depending on the feed method and the media type. See the following for paper
sizes.
U “Supported Media” on page 118
Name Paper
Thickness
Width Length Size
A Auto sheet feeder 0.08 to 0.3 mm 89 to 431.8 mm
127 to 950 mm
*1
10 x 15 cm (4 x 6 in) to A2
B Fine art media 0.29 to 0.7 mm 203.2 to 431.8
mm
254 to 950 mm
*1
203 x 254 mm (8 x 10 in) to A2
C Poster board 1.2 to 1.5 mm
254 to 594 mm
*1
D
Roll paper
*2
0.25 to 0.7 mm 329 to 431.8 mm 55 to 1117.6
mm
*3
A3+ to A2 (13 to 17 in)
*1 The maximum length you can set in the printer driver is 3276.7 mm.
*2 The length can be longer than the maximum length specified if the application supports banner printing. However, the actual
printable size depends on the application, the paper size loaded in the printer, and the computer environment.
*3 The maximum length you can set in the printer driver is 15000 mm.
SC-P800 Series User’s Guide
Basic Operations
23
To Next Page
Loading...
Need help?
General
