User-defined Paper Sizes/
Custom Paper Sizes
You can also print on paper sizes that are not already
available in the printer driver. User-defined paper sizes
that have created and saved as described below can be
selected using the application page setup option. If your
application supports creating user defined sizes, follow
the steps below to select the same size that was created in
the application, and then print.
See the following for information on the paper sizes
supported by this printer.
U “Usable Commercially Papers” on page 122
In addition, you can select User Defined Paper Size
(Windows) or Custom Paper Sizes (Mac OS X) in the
printer driver. See the following for details on the paper
sizes.
U “Loading Paper” on page 23
c
Important:
❏ Although you can specify a large paper size
which cannot be loaded on this printer, it will
not be printed properly.
❏ The available output size is limited depending
on the application.
Adjusting Settings in Windows
A
When the printer driver's Main screen is
displayed, click User Defined.
U “Printing (Windows)” on page 35
B
In the User Defined Paper Size screen, set the
paper size you want to use, and then click Save.
❏ You can enter up to 24 single-byte characters
for the Paper Size Name.
❏ The length and width values for a
pre-defined size close to the desired custom
size can be displayed by selecting the
appropriate option in the Base Paper Size
menu.
❏ If the length and width ratio is the same as a
defined paper size, select the defined paper
size from Fix Aspect Ratio and select either
Landscape or Portrait for the Base. In this
case, you can only adjust either the paper
width or paper height.
SC-P800 Series User’s Guide
Printing Varieties
77
To Next Page
Loading...
Need help?
General
